B200 Polypropylene Cam & Groove Fitting, 2 Inch Female Camlock Coupler X Male NPT Thread

CAM LOCK COUPLER – POLYPROPYLENE TYPE B FEMALE COUPLER / MALE NPT

Polypropylene cam lock coupler Type B is typically used with Type F, A & E adapters to connect low pressure suction hoses to pumps.

• Type B Coupler – Female coupler by male NPT thread
• Body material: polypropylene  for resistance to most chemicals, dimensional stability, and sterilization.
• Gasket material: NBR
• Handles & pins: stainless steel
• Maximum operating pressure of 125 psi
• Maximum Temperature: 185° F
• Available in 3/4″, 1″, 1-1/4″, 2″ sizes

Safety Notes:
Under no circumstances should cam and groove couplings be used for compressed air or steam service!

Pressure rating recommendations are based on the use of mating fittings at ambient temperature 70°F with a standard seal installed.

Cam locks are suitable for transfer of water and compatible chemicals/vapors. PRM is in no way is responsible for the selection, suitability of, nor the material compatibility of materials being pumped through the fittings.

PRM is expressly not responsible for all installations and any damages due to leaks, ruptures, bursts, explosions or other damages. Damages limited to only the replacement of the defective items. Final decision on warranty is at the sole discretion of PRM Filtration Management.

_________________________________________________________________